PJM works out interconnect deal for 20-MW flywheel project in Pennsylvania

PJM Interconnection on Feb. 5 filed with the Federal Energy Regulatory Commission an executed interconnection service agreement with Valley View Spindle LLC, which is developing a 20-MW flywheel project, and transmission owner PPL Electric Utilities Corp.

The Valley View ISA facilitates the interconnection to the PJM  system of 20 MW (Maximum Facility Output) at the Valley View Flywheel Station Facility located in Jessup Borough, Lackawanna County, Pennsylvania. The Valley View ISA indicates that Valley View shall be an Energy Resource permitted to inject 20 MW (nominal) into the system.

Under this agreement, Valley View must, on or before Dec. 31, 2016, demonstrate commercial operation of all generating units. The project would consist of flywheels connected through 110-kW inverters. Twenty inverters are connected to one of ten step-up transformers. This project is in PJM Queue Position #Z1-098.

A flywheel system is a form of temporary energy storage, where electricity is used to spin a flywheel, with the kinetic energy from that spinning then available to later generate electricity to compensate for grid fluctuations.

A developer contact is: Valley View Spindle LLC, 65 Middlesex Road, Tyngsboro, MA 01879, Attn: Robert Rounds.

About Barry Cassell 20414 Articles
Barry Cassell is Chief Analyst for GenerationHub covering coal and emission controls issues, projects and policy. He has covered the coal and power generation industry for more than 24 years, beginning in November 2011 at GenerationHub and prior to that as editor of SNL Energy’s Coal Report. He was formerly with Coal Outlook for 15 years as the publication’s editor and contributing writer, and prior to that he was editor of Coal & Synfuels Technology and associate editor of The Energy Report. He has a bachelor’s degree from Central Michigan University.