FERC okays interconnects for 320-MW renewable project in Ohio

The Federal Energy Regulatory Commission on Aug. 12 signed off on interconnection agreements related to a 320-MW wind and solar power project in Ohio.

PJM Interconnection, under its Open Access Transmission Tariff, on July 15 had submitted for filing at FERC three executed interconnection service agreements (ISAs) for new wind and solar energy projects in Hardin County, Ohio. The agreements are among PJM, AEP Ohio Transmission and the three separate owners of the Hardin Energy Center: Hardin Wind Energy LLCHardin Wind Energy II LLC and Hardin Solar Energy LLC. The contact in the ISAs for all three of these projects is Invenergy LLC out of Chicago.

PJM also submitted an executed interconnection construction service agreement (CSA) among PJM, Hardin, and AEP.

The Hardin ISAs facilitate the interconnection to the PJM system of the entire 320-MW Hardin Energy Center located in Hardin County. Each of the Hardin ISAs is for a separate portion of this facility. The Hardin ISA is for a 207.4-MW portion, the Hardin II ISA is for a 92.6-MW portion and the Hardin Solar ISA is for a 20-MW portion. The entire facility will consist of 200×1.62-MW General Electric wind turbines and 20×1.0-MW blocks of photovoltaic modules. These projects are due for commercial operation in the 2015-2016 period.

Said the Hardin Solar ISA about the overall project: “The Hardin Parties intend that the output of each individual wind turbine generator for Queue Position No. U2-041, which are the subject of the Hardin ISA and Hardin II ISA, will be 1.6 MW instead of the originally intended 1.5 MW. The total collective net MW output of the Hardin and Hardin II Interconnection Customer Equipment shall be limited to a total of 300 MW (‘Wind Farm MW Limit’) which corresponds to the fixed net MW limit for Queue Position No. U2-041 and the total collective number of turbines shall be limited to 200 turbines. Any increases to the Wind Farm MW Limit will require a new Interconnection Request. The net output of the Hardin Solar Interconnection Customer Equipment will be 20 MW, which corresponds to the fixed net MW limit for Queue Position No. V3-028. The Maximum Facility Output for the entire Customer Facility, consisting of the Hardin, Hardin II, and Hardin Solar Interconnection Customer Equipment, will be 320 MW (‘Hardin MFO’), which corresponds to the fixed net MW limit for Queue Position Nos. U2-041 and V3-038.”

About Barry Cassell 20414 Articles
Barry Cassell is Chief Analyst for GenerationHub covering coal and emission controls issues, projects and policy. He has covered the coal and power generation industry for more than 24 years, beginning in November 2011 at GenerationHub and prior to that as editor of SNL Energy’s Coal Report. He was formerly with Coal Outlook for 15 years as the publication’s editor and contributing writer, and prior to that he was editor of Coal & Synfuels Technology and associate editor of The Energy Report. He has a bachelor’s degree from Central Michigan University.